Fillet Knives & Tools

Do-It Cannon Ball Sinker Mold (Sz: 4, 5, 6)

Cannon Balls drop faster and straighter than other sinkers. Load your rig with these round sinkers and shoot your lure down to the depths you need.4 oz. - 1.05 in.5 oz. - 1.14 in.6 oz. - 1.20 in. Cannon Ball SinkerSz: 4, 5, 6

Do-It Claw Sinker Mold (Sz: 5 1/2, 8)

When you're angling in heady waters, the Claw Sinker hangs on like a grappling hook...even under very swift currents. Pre-made wire forms are not available, but it is easy to create your own forms using galvanized wire found at your hardware store.

Do-It Crescent Sinker (Sz: 1, 1 1/2, 2, 3)

Shaped like a crescent moon and designed as an in-line sinker, the Crescent Sinker acts as a keel to prevent rotation and line twists. Optional swivels may be added to each brass wire eye for added performance. Crescent SinkerSz: 1, 1 1/2, 2, 3

Do-It Crescent Sinker (Sz: 4, 5)

Shaped like a crescent moon and designed as an in-line sinker, the Crescent Sinker acts as a keel to prevent rotation and line twists. Optional swivels may be added to each brass wire eye for added performance. Crescent SinkerSz: 4, 5

Do-It Darter Jig (Sz: 1/4, 3/8)

The Darter Jig darts through the water similar to a Bullet Jig, but uses larger hook sizes and features a standard balance for all-around use. Darter JigSz: 1/4, 3/8Hk: 570 or 575Collar: Barb      

Do-It Egg Sinker Mold (Sz: 1/8, 1/4, 3/8, 1/2, 3/4, 1, 1 1/2, 2, 3)

"Slip" by your fish undetected. The line will slip through the Egg or Slip sinker, so the fish will not feel the weight of the sinker when it picks up the bait. The hook settles more quickly without the sinker's resistance. Plus, the fish can't use the...

Do-It Football Jig Mold (Sz: 1/16, 1/8, 1/4, 3/8, 1/2, 3/4, 1)

The Football jig scores big for bottom fishing and as a probing tool. The wide-shaped jig head prevents the lure from fumbling on its side. Instead, this "all-star" drags along the bottom with the hook always remaining upright. Line pressure causes the...

Do-It Lee Precision Melter

A good little furnace holding 4 lbs. of lead. Melting time is about 15 minutes. Suitable for use with jig, smaller sizes of sinkers and all bullet molds. Use with Lee lead ladle. 500 watts, 110 or 220 Volt AC, adjustable heat control, guaranteed by LEE...

Do-It Molds Small Steel Ladle

The pot will hold up to 5 lbs. of lead and can be used on a variety of heat sources. It has pre-drilled holes to attach a handle if desired. Small-sized ladle, perfect for filling smaller cavities. Holds approximately 5 oz. of lead with right and left...

Do-It No Roll Sinker (Sz: 1, 1 1/2, 2, 3)

The flat, low profile does not drift with the current, so your line stays in place. A CP332 core pin for each cavity is included. Core pins can be stripped away immediately in the mold or later after the extracted parts have cooled. Extra CP332...

Do-It Palmer Hot Pot-2 Melter

This is an improved version of the traditional "electric ladle." The heating element is now mounted externally to greatly extend element life. The HOT POT-2 both melts and pours lead. An ideal beginners unit since there is nothing else to buy. Features:...

Do-It Pyramid Sinker (Sz: 2)

The Pyramid Sinker excels in strong currents with any bottom condition. The pyramid tends to bury itself if the bottom is soft. On hard bottoms, the flat sides will prevent the pyramid from rolling with the current.   2 oz.   ...